No successful full-original AI principal category evidence.
Tender Description
Drywall Partition with Double Door – Sound Department, The Playhouse Company
1. Scope of works
Supply, install and paint one standard drywall partition, 8.0 m long × 2.5 m high, with one double wooden
door, at the Sound Department, The Playhouse Company, Durban.
The works include:
•
•
•
•
•
•
Setting out, lightweight steel stud framing, fixing to floor, soffit and abutting walls
Flexible sealing at all perimeters
Gypsum plasterboard to both faces, taped, jointed and finished ready for paint
Framed opening, hardwood door frame, pair of solid-core wooden doors and ironmongery
Priming and painting both wall faces; sealing and varnishing the doors, frame and architraves
Protection of the existing building, daily clean-up, removal of waste, and handover
All work must comply with SANS 10400 (National Building Regulations), the board and framing
manufacturer's installation guide, and the Employer's site rules. Noisy work is to be scheduled around
rehearsals and performances as agreed with the venue.
2. Design basis
The partition is a 132 mm thick standard drywall partition: 102 mm steel studs at 600 mm centres. Net
board area is approximately 33 m² after deducting the door opening.
Item
Value
Wall length
8.000 m
Wall height (floor to soffit/ceiling)
2.500 m
Wall thickness (finished)
132 mm
Gross area per face
20.00 m²
Door leaves
2 No. × 813 × 2 032 mm, solid core
Structural opening in drywall
1 720 mm wide × 2 090 mm high
Opening area
3.59 m²
Net area per face
16.41 m²
Net area, both faces (boarding and painting)
32.82 m²
Steel framing perimeter (floor + soffit + 2 ends)
19.27 m (floor track omitted across the
opening)
Concept drawing
Figure 1 – Concept elevation and typical plan section of the standard drywall partition. Indicative only; the
door position and final dimensions are to be confirmed on site.
3. Technical specification
3.1 Framing
•
•
•
Galvanised light steel, 0.55 mm min. thickness: 102 mm floor and ceiling tracks and 102 mm studs...